Flat keys for PTPK padlock

[Timothy]

The last time I know that Ilco has two differ keys for these PTPK. This one it : ILCO 1239, D/L 639, Taylor T113. The width .285"-7.2mm, Thick .004"-1.0mm. I don't know if this on market or not.....Timothy.....

[candado3]

The last time I know that Ilco has two differ keys for these PTPK. This one it : ILCO 1239, D/L 639, Taylor T113. The width .285"-7.2mm, Thick .004"-1.0mm. I don't know if this on market or not.....Timothy.....

Thanks for the reply Timothy.
As far as I can see the 1031 and 1239 are the same size.
The 1031 is nickel silver and the 1239 is flat steel.
I have a FULTON PTPK padlock made by Slaymaker with the original key that is .330" wide and .055" thick that fits the Sargent keyway nicely so that would be the key blank that I am looking for.

[Timothy]

OK! do you have key blank number for it. I just found a web site to get the 1239 but you already has it...https://www.worthpoint.com/worthopedia/locksmith-ilco-1239-flat-steel-blank-1868185104......Timothy......

[Timothy]

Just a little more information that I found. Not sure if this the kind of PTPK you have but I'm sure the key blank will fit No. 5559. I know they don't make it any more....Timothy.......

[Pschiffe]

Just a little more information that I found. Not sure if this the kind of PTPK you have but I'm sure the key blank will fit No. 5559. I know they don't make it any more....Timothy.......

I believe the Sargent 5559 blank is l-o-n-g discontinued but I found an Old Ilco blank that is probably the equivalent, 1248S which is .335" wide x .050" thick; also discontinued but another possibility, see thumb nail attached.

Pete

[Timothy]

Pete
Where you findthe 1248S Blank at I don't see it in the ILCO Catalog....??..Timothy.....

[nathanbonstein]

perhaps cut down a flat steel k ey ? i just used my last blank on this sargent. Pete is correct on the blanks and i doubt you will find one. This blank had a 251E on it and i do not know who made them.

[Pschiffe]

Pete
Where you findthe 1248S Blank at I don't see it in the ILCO Catalog....??..Timothy.....

Timothy, note that I said Old Ilco, can be found in:

1. 1950 Ilco Cat. 13G, Pg. 30
2. 1949 Ilco Cat. 12B, Pg. 30
3. 1947 Ilco Cat. 12A, Pg. 29
4. 1941 Ilco Cat. 12, Pg. 163
5. 1936 Ilco Cat. 11, Pg. 64
6. 1932 Ilco Cat. 10, Pg. 56
7. 1930 Ilco Cat. 9, Pg. 43

In 1941 the net price was $4.80 per gross.

Pete Schifferli