Looking for information on Lever-tumbler padlocks

[nathanbonstein]

just dropped it off at post office,also incuded other info.
it will be awhile on key,i been between vegas and here 2-3 times a week
enjoy

[nathanbonstein]

your 893 fg29, if it is flat key might try blank #74 if oval it should be #84 . fg29 should convert to f 629 i only can find up to 1-625 and it only uses 1-4 cuts,a lot of these codes use a 5 cut,i do not have.
enjoy the lock ,i have not been able to get the ilco #1 blank from any supplier now ,it is still listed in ilco catalog 12 sec 2 p70 ? have not found the 88 or 188 blanks reasonable either. here is a photo of some yale blanks. i am looking for the 74 blank picture,but did not find it yet there is a couple of blank # under the yale #

[nathanbonstein]

found it .060x.450 flat steel,hope picture is clear enough

[Pschiffe]

found it .060x.450 flat steel,hope picture is clear enough

Here is a better image of No. 74, it appears that the number was later changed to 3217; all are obsolete but Ilco 1210A found on Pg. 6 of Sec. 6a of Ilco key Blank Directory, 12th Edition looks like a good match.
With reference to Ilco #1, it does not appear in the Ilco Price List dated 9/1/18 and I suspect that it is no longer extant and was listed in the Directory in error. I'll check with my contact at Ilco in Rocky Mount to see what I can find out.

Pete Schifferli

[Pschiffe]

Here is a better image of No. 74, it appears that the number was later changed to 3217; all are obsolete but Ilco 1210A found on Pg. 6 of Sec. 6a of Ilco key Blank Directory, 12th Edition looks like a good match.
Pete Schifferli

I have some 1210As Nathan, PM me if you would like me to send you a few; I have your snail mail address.

Pete Schifferli

[Pschiffe]

With reference to Ilco #1, it does not appear in the Ilco Price List dated 9/1/18 and I suspect that it is no longer extant and was listed in the Directory in error. I'll check with my contact at Ilco in Rocky Mount to see what I can find out.
Pete Schifferli

Here is what Ilco says about their #1 key blank:
This key is flagged "to be discontinued" but we currently have inventory on this key. Once this inventory is gone we will no longer offer this key.
Thus any Ilco distributor should be able to source this blank, subject to stock on hand.

Pete

[nathanbonstein]

thank you.Pete
i just tried to order the #1 if any is left in stock from Anixter/Clark waiting on reply,i asked for 100 so hopefully there is still some available.
really appreciate your help,i been trying for awhile.
thank you

[Pschiffe]

thank you.Pete
i just tried to order the #1 if any is left in stock from Anixter/Clark waiting on reply,i asked for 100 so hopefully there is still some available.
really appreciate your help,i been trying for awhile.
thank you

Anixter/Clark web catalog doesn't show any in stock nationwide but I confirmed they were on the shelf in Rocky Mount this morning. The #1 blank is in Price Group 23 with an MSRP of $523.10/C. Presuming they can get them, their Item No. is likely CS133487 and your dealer net would be only about $4.15 ea.!

Pete Schifferli