Welcome to our world exploring the Historical, Political and Technological aspects of Locks, Keys and Safes

Results 1 to 9 of 9

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2019
    Posts
    7
    Country: UK

    Default Removing Milner door

    I need to get a Milner 212 upstairs via a tight awkward staircase which would be difficult for more than 2 people to lift the safe. I thought that if I could remove the door then 2 people could carry each part. I have removed the 2 screws from the top hinge but there appears to be a locating pin between the screws which I don’t know how to remove. I have tried driving a screwdriver between the hinge & door with no success. Is it possible to remove the hinge & will the door then lift out of the bottom pivot without removing the lower hinge?

  2. #2
    Join Date
    Sep 2007
    Location
    Aberdeenshire
    Posts
    697
    Country: Great Britain

    Default

    Quote Originally Posted by Markfd View Post
    I need to get a Milner 212 upstairs via a tight awkward staircase which would be difficult for more than 2 people to lift the safe. I thought that if I could remove the door then 2 people could carry each part. I have removed the 2 screws from the top hinge but there appears to be a locating pin between the screws which I don’t know how to remove. I have tried driving a screwdriver between the hinge & door with no success. Is it possible to remove the hinge & will the door then lift out of the bottom pivot without removing the lower hinge?
    There are usually 3 screws on the hinge. Tap and scrape and it should be there.

    Click image for larger version. 

Name:	Milner serial number_edited-1.jpg 
Views:	15 
Size:	201.4 KB 
ID:	20909

  3. #3
    Join Date
    Feb 2019
    Posts
    7
    Country: UK

    Default

    Oh, I see that the middle screw goes in the opposite direction. Will the door then lift out of the bottom pivot without removing the hinge?

  4. #4
    Join Date
    Feb 2019
    Posts
    7
    Country: UK

    Default

    I still can’t see any sign of a screw head, it looks more like some sort of press fit pin. It is a very early Milner. The diameter on the outside looks much bigger than the other two.
    Attached Thumbnails Attached Thumbnails 424296BD-D5AD-4EF9-869B-6310204A6941.jpeg   1FCD4A58-056A-4CAD-A3ED-E9266F17CB6B.jpeg  

  5. #5
    Join Date
    Sep 2007
    Location
    Aberdeenshire
    Posts
    697
    Country: Great Britain

    Default

    Quote Originally Posted by Markfd View Post
    I still can’t see any sign of a screw head, it looks more like some sort of press fit pin. It is a very early Milner. The diameter on the outside looks much bigger than the other two.

    Most unusual. Looks like it's a rivet in the middle. If so you could either drill it right through or just cut away the countersink on the outside and punch it in with the screws firmly in place to take the strain.

    Once the hinge is free the door will lift straight up and out.

    Might be that a rivet was used if the original screw thread was damaged. No matter, hope you get it out OK.

  6. #6
    Join Date
    Feb 2019
    Posts
    7
    Country: UK

    Default

    Thanks for the information, I ll try that tomorrow. I can make a larger screw on my lathe & tap the hinge with a larger thread afterwards.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •