Welcome to our world of Locks and Locksmiths (click logo or scroll down to view all):-

 www.Antique-Locks.com 
HoL
Or are you looking for modern, or recent past,
Keys, Locks or Safes.
keys, locks & safes
Industrial Archaeology of Locks History of Locks Museum
Please support the HoL Museum Shop where you can.
Researching locks from antiquity to the recent past.Maintaining a reference collection & archive.
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2016
    Posts
    73
    Country: Canada

    Default Looking for help with Eagle pushkey padlock

    Iím looking for some help and information about making new key for my EAGLE pushkey padlock. The lock is 1 ĹĒ wide and has the patent date of Feb 7, 1911 on the bottom. The lock could not be shimmed as a shim will not fit into the tight space around the core. I picked the lock by putting pressure on the shackle and then single picked the four pins. I unscrewed the bushing expecting to find a spring similar to what I have seen on other pushkey padlocks but there was only an empty space. I then looked up the patent and see that there is a coil spring around the shackle inside the body of the lock.
    My question is, can this lock be dismantled in order to make a new key and if so how would one go about doing this? I do have one key blank that fits this lock.
    Attached Thumbnails Attached Thumbnails eagle1.jpg   Eagle2.jpg   Eagle3.jpg   eagle4.jpg   eagle5.jpg  

    eagle6.jpg   eagle pat 1.jpg  
    Attached Files Attached Files

  2. #2
    Join Date
    Nov 2013
    Location
    california
    Posts
    257
    Country: United States

    Default

    i think there is a break down of the 2" version on here i did some time back.?
    i did shim it but it was the larger size and when i put it bak togather i turn the shacle sideways and used a shim to reassemble it tohold the pins down as i slid it in the body.
    you have a blank # ? i have a few left but no 1013c,have a couple of others.

  3. #3
    Join Date
    Jan 2013
    Posts
    606
    Country: United States

    Default Looking for help with Eagle pushkey padlock Your Message

    Yes it can be slim. Just need to cut the slim of how wide the top of the plug that it flat. Best to lubricant so the slim can go in easy. The Eagle lock i has was flat steel blank. Went i got the lock open i measure and read the pin to get the cut. I did show post awhile back. I never got to the point of taken the plug out like Nathan did.....Timothy....

  4. #4
    Join Date
    Nov 2013
    Location
    california
    Posts
    257
    Country: United States

    Default

    how is this project doing ? is the keyway a 1014 ea1 if so i have some four 4 or 5 pin ,you need them i can send you a couple or if another # blank ,i can look for ?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •