Welcome to our world exploring the Historical, Political and Technological aspects of Locks, Keys and Safes

Results 1 to 10 of 26

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2017
    Location
    Kansas city
    Posts
    20
    Country: United States

    Default My first Safe Hall’s Safe and co

    Hello. I’m new to the forum. Would like to share a little about what I’m intending to do. I have been lightly cleaning the entire Safe. I am looking for advice on how to minimize the imperfections on the front. I have made contact with a person to touch up the lettering and possible gilding. My thought are to then clear coat and utilize as a home safe. Any advice on touching up would be appreciated. The safe is 45x30x27
    sargent & Greenleaf mechanism.
    Attached Thumbnails Attached Thumbnails B2063CB0-6013-4652-A2DB-7337D75F01DA.jpg   1FB1598D-959A-4875-B06C-D9A0CB231D75.jpg  

  2. #2
    Join Date
    Dec 2017
    Location
    Kansas city
    Posts
    20
    Country: United States

    Default

    Sorry about orientation of images.

  3. #3
    Join Date
    Mar 2010
    Location
    Wisconsin
    Posts
    147
    Country: United States

    Default

    To touch up, you can try using a satin black enamel with a small brush to touch up chips and scratches. On the art work it will be tough to match. Hard to tell in pictures but the lettering may be gold leaf but the stripes may be gold paint. It will be difficult to touch up the worn corner and not have it stand out just as much as the wear.

    The old safes were covered with a coat of varnish to add shine and protect artwork. Often the finish is rough and crazed with age. Cleaners will take dirt off but will sometimes whiten the varnish. If it is dull and colorless try wiping it with a rag slightly wet with varnish. It will often shine the finish and bring out the colors but will to nothing for the aged texture. It will also help hide touch ups. Experiment in an inconspicuous spot such as on the back first to test compatibility and if it meets your needs. Careful with clear coat and test to see if it reacts with the old varnish and paint. Varnish might be a better option.

    Here is a before and after using varnish to retrieve artwork.

    hu35v8 1f2v809 1

  4. #4
    Join Date
    Dec 2017
    Location
    Kansas city
    Posts
    20
    Country: United States

    Default

    I’ll try that. Thanks. Another question I have is does anyone have a photo of the inner door latch or lock. Mine is missing. I have been watching eBay but since I don’t know what I’m looking for I haven’t had any luck. Here’s a photo of the inner door.
    Attached Thumbnails Attached Thumbnails image.jpg  

  5. #5
    Join Date
    Dec 2017
    Location
    Kansas city
    Posts
    20
    Country: United States

    Default

    Has anyone replaced the hinge pins for the door on a similar safe? Besides dealing with the weight of the door are there any other issues I should expect. Will I have to have the replacements made? Or can they stilll be found?

  6. #6
    Join Date
    Feb 2016
    Location
    new york / NYC area
    Posts
    94
    Country: United States

    Default Hall lock

    If you could PM the measurement of the bolt pattern with the center to center and the over all case size.
    enjoy Tim

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •