Sliding door mortice lock from airfield control tower - info please

[Huw Eastwood]

Whereabouts of (some of) the key have been resolved:

You won't have any problems making that like new again Al, you could also swap the order of the levers before you cut new keys, if they're worried about any old keys that might still be around. It looks like it's in very good condition.

Broken keys on warded locks like that were common and even more so on those hook bolt locks where there's a lot of action and torque on the key- even more so when they're well greased up and the grease has started to dry out....it acts like adhesive, add to that a door that's dropped or a receiver that's out of alignment and it's a one-way ticket to disaster. I'm sure you'll get it all back and working like new again.

...which probably necessitated changing the bulb.

"oh smeg.."

[Arcade Al]

It wasn't me making the key Huw, it's just a project I am interested in, and I used their photos - I have met the couple who are undertaking the restoration project and it's fascinating to see the progress they are making.

They have now got two keys made for them by a local locksmith, I am pleased to report.

I posted here in the hope that someone might be able to identify the manufacturer or narrow it down somewhat.

A memory I seem to have is that somewhere or other there is an online "catalogue" of locks of a similar type to this. I was perusing it when trying to identify a Willenhall marked lock inside an MOD cabinet which I have. That's a long time ago now though, and I cannot for the life of me remember where I found them...

[Huw Eastwood]

It's good news they got it all sorted Al

An added complication with IDing those sort of locks is that quite a lot were made by foundries/engineering companies and not actual 'lock manufacturers' as such.
This was because most, and often all, of the component parts were brass or steel castings that were then finish machined- well within the scope of such firms.
Cases, hooks, bolts, linkages, covers and even the levers were often cast in brass.

There were many oddballs we could never get replacements for and some of the really big locks off the heavy industrial doors weren't even remotely similar to others in size, shape or configuration.
As a result it often meant rescuing 'scrappers' back from the dead by silver brazing cracked parts, turning new bushings etc, as it was the only way for many of the oddball sizes.
The repairs always worked beautiful like new on brass and steel, none of it would apply today with what's probably now all die-cast zinc tat!

BTW, it's possible the online catalogue might have been Brian's, I recall they had lots of interesting vintage listed but when I last looked the E Morlands site was being developed.