Hi guys,
It has been quite some time since I have posted but here I go. I am currently restoring a Milner safe. It is 1200 high x 900 x 900 two door. The serial number is 171543 which is the same number that is on the lock itself. The bolt has "Milner Liverpool & London" in that order. I am aging this at around 1885???
Unfortunately the safe has been cut open with both cutting disks and heat. I have removed the back panels and all of the alum crystals/sawdust and also the two doors (no easy feat!)
FYI the doors are 45 kg each and the safe with no back, doors or fire retardant is approximately 300 - 350 kg so all up its a pretty hefty unit. So I am missing one knob and one brass plate but worst of all is someone has gassed the lock. As per the photos I have rebuilt all the levers (one still to be machined) but the main block is not repairable (apologies for the photo). I have had the entire safe sand blasted and etch primed. Can anyone shed some light of where I could source a replacement lock in the UK as they are not a common thing here in NZ but I see these safes all over e bay in UK. I am comfortable that I can obtain the brass plate and handle via e bay.
I would be happy to pay 100 pound plus shipping for all three pieces.
Any feed back would be much appreciated

Kind regards

Wayne

paperclip Attached Thumbnailsattachmentphp?attachmentid17917&ampstc1&ampthumb1&ampd1496031704 attachmentphp?attachmentid17918&ampstc1&ampthumb1&ampd1496031704 attachmentphp?attachmentid17919&ampstc1&ampthumb1&ampd1496031704 attachmentphp?attachmentid17920&ampstc1&ampthumb1&ampd1496031704 attachmentphp?attachmentid17921&ampstc1&ampthumb1&ampd1496031704