Welcome to our world exploring the Historical, Political and Technological aspects of Locks, Keys and Safes

Results 1 to 10 of 10

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2013
    Posts
    714
    Country: United States

    Default Legge Rim Cylinder for Night Latches

    I didn't know I had this cylinder as looking at the key its marked 'Made in England'. Also it has PAT. NO 630057. I looked up the PAT. NO. and that's how I found out it's Legge CO. This is first time seeing PAT. NO. on cylinder. Date 08-11-1947. Company open in 1881 under name J. Legge CO. As far as the key blank, I'm still looking for it and I'm sure most would agree it looks close to a Yale key. Trying to get information on blanks from England. Have not come up with anything yet....Timothy.....
    Attached Thumbnails Attached Thumbnails Legge Company Pat NO. 630057 Lock England 1.jpg   Legge Company Pat NO. 630057 Lock England 3.jpg   Legge Company Pat NO. 630057 Lock England 4.jpg   Legge Company Pat NO. 630057 Lock England 2.jpg   Legge Company Pat NO. 630057 Lock England 5.jpg  

    Last edited by Huw Eastwood; 16-02-17 at 10:28 PM.

  2. #2
    Join Date
    Sep 2004
    Location
    Devon UK
    Posts
    3,117
    Country: UK

    Default

    Quote Originally Posted by Timothy View Post
    I didn't know I had this cylinder as looking at the key its marked 'Made in England'. Also it has PAT. NO 630057. I looked up the PAT. NO. and that's how I found out it's Legge CO. This is first time seeing PAT. NO. on cylinder. Date 08-11-1947. Company open in 1881 under name J. Legge CO. As far as the key blank, I'm still looking for it and I'm sure most would agree it looks close to a Yale key. Trying to get information on blanks from England. Have not come up with anything yet....Timothy.....
    The blank is common enough over here- but you already have one -what is the problem?
    They originally came with a variety of stampings including "Willen" and a three legged logo similar to the isle of man logo

  3. #3
    Join Date
    Jan 2017
    Location
    Signal Hill CA
    Posts
    11
    Country: United States

    Default Legge Rim Cylinder

    Tom was no problem. Just hoping maybe someone has picture of original key from Legge. I'm sure someone may have catalog of this key blank. As we don't see very many antique key blank from England. ...Timothy.

  4. #4
    Join Date
    Sep 2004
    Location
    Devon UK
    Posts
    3,117
    Country: UK

    Default

    Quote Originally Posted by ltgbk View Post
    Tom was no problem. Just hoping maybe someone has picture of original key from Legge. I'm sure someone may have catalog of this key blank. As we don't see very many antique key blank from England. ...Timothy.
    Over here we wouldn't call Legge stuff antique but here are some newer and older ones
    regards
    Tom

  5. #5
    Join Date
    Jun 2009
    Location
    Edinburgh
    Posts
    259
    Country: UK

    Default antique -- meaning?

    British law has no legal definition of antique. Board of Trade (as was), Customs & Excise, and Home Office guidance to police, long ago settled on '100 years' for most things (there are detail differences for firearms).

    With Yale patent monopoly protection expired, the first UK company to make copies of the Yale pin tumbler cylinder was Kenrick in 1908. Legge contemplated production in 1936, but apparently did not start until after WW2. Whether commercial production actually started before 1950 is uncertain. Jim Evans, sometime MD of the key-making company Arthur Hough, had reason to think it did not.

    There were over a dozen companies making copies of the Yale cylinder and locks in Britain. They agreed to make them compatible. This was not the case with several rival cylinder locking devices, several of which were lever mechanisms.

  6. #6
    Join Date
    Sep 2004
    Location
    Devon UK
    Posts
    3,117
    Country: UK

    Default

    Quote Originally Posted by chubbbramah View Post
    British law has no legal definition of antique. Board of Trade (as was), Customs & Excise, and Home Office guidance to police, long ago settled on '100 years' for most things (there are detail differences for firearms).

    With Yale patent monopoly protection expired, the first UK company to make copies of the Yale pin tumbler cylinder was Kenrick in 1908. Legge contemplated production in 1936, but apparently did not start until after WW2. Whether commercial production actually started before 1950 is uncertain. Jim Evans, sometime MD of the key-making company Arthur Hough, had reason to think it did not.

    There were over a dozen companies making copies of the Yale cylinder and locks in Britain. They agreed to make them compatible. This was not the case with several rival cylinder locking devices, several of which were lever mechanisms.
    those "several rivals" were Chubb, Wellington and anyone else?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •