Welcome to our world of Locks and Locksmiths (click logo or scroll down to view all):-
 www.Antique-Locks.com 
  
HoL
   COLTi
Or are you looking for modern, or recent past,
Keys, Locks or Safes.
keys, locks & safes
Industrial Archaeology of Locks HoL Museum
COLTi
  
Please support our forum sponsors where you can.
Researching locks from antiquity to the recent past.Maintaining a reference collection & archive.Today's scene and cutting edge developments.
Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2016
    Location
    Greenville, SC
    Posts
    1
    Country: United States

    Question Antique Herring"s Patent Champion Safe

    Hello Everyone,
    I have recently acquired my Great Grand Fathers 2 door Antique Herring's Patent Champion Safe (Late 1800's). Unfortunately it is Closed and locked and the combination that the previous owner had does not work. I was told by the safe mover that the lock is a Dexter four number. He said that he could open the safe but he would have to drill a hole in the door and use a bore scope to see the lock mechanism.
    Any advice, options or informed opinions are welcome.
    Attached Thumbnails Attached Thumbnails Herring Safe.JPG  

  2. #2
    Join Date
    Dec 2009
    Posts
    1,258
    Country: United States

    Default

    One approach is http://savta.org and click on Safe Tech Search, enter your zip code (there appears to be two listed in your area). A good safe tech might offer to manipulate the lock rather than drilling depending on his (or her) skill, time, and cost (and the lock makes a difference). Sometimes just getting the dialing sequence right is a key even if you have the combination on paper. Drilling is generally undesirable but may be way cheaper.

  3. #3
    Join Date
    Feb 2016
    Location
    new york / NYC area
    Posts
    61
    Country: United States

    Default

    OK are you dialing the Dexter lock correctly.
    5 times right-4times left-3 times right-2 times left- to zero -to 25 and stop.
    This lock doesn't re-track the bolt, it just drop onto the split wheel pack of drivers. The body of this lock is cast iron. you may have rust holding this lever from dropping . The zero is per set from the factory.
    any other questions PM and Ill answer them on this safe. TJ

  4. #4
    Join Date
    Aug 2014
    Posts
    5
    Country: United States

    Default What was the outcome?

    Hi
    Two years after the fact, but wondering if you were able to get it open? I have a Herring that looks very similar I was able to get the combination to and wondered if I could help at all (not a locksmith, but perhaps my experience would help you out).

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •