Pete, thanks for info. Doug
Printable View
Pete, thanks for info. Doug
Thanks for all the replies and suggestions.
the spring is very tight coming out the shakle hole. i used a old 805 broken spring and drill a hole in it ,rounded the edges and narrowed it at the screw hole sides. it goes in and works on mine. i used a 1/2" dowel to help get the spring out. you think this will work on yours ? let me know and i can send it to you.
Attachment 19626Attachment 19627Attachment 19628Attachment 19629Attachment 19630Attachment 19631Attachment 19632Attachment 19633Attachment 19634Attachment 19635Attachment 19636
mine had a crack at screw hole so i replaced it and seems to work fine. check the spring tension ,you might want to make it more or less.
Thanks Nathan.
It looks like it may work fine.
I would be happy to pay for it. Let me know the cost.
will post tomorrow,hope it works,it worked in both types of 805f i have.
just made a spring for this 805f,it works great and fits in shackle hole nicely. here is some measurements that worked good for me. Hopefully they work on yours.
Attachment 19740
almost flat with .003 curve in shackle end