Originally Posted by
goldpro
Hi all,
Help.... I'm trying to fit keys to this T handle lock from a Grenfell boat cabin.
I can't disassemble it, can't impression it, and can't pick it.
has 5 pin tumblers with rounded bottoms.
taking the set screw out doesn't accomplish anything.
I think it must screw together somewhere but because it has
all been chromed I can't tell where.
Looking into the set screw hole I can see a relief cut into the plug
both above and below the screw so I think that would allow the
key to turn only a quarter turn in each direction.
I don't have the rest of the lock.
Just wondering if anyone has ever fit a key or could offer any advise
on how to get it apart or fit a key.
The blank I used was for an arco bank bag I think.....ilco 1131R but
modified considerably...shortened, lowered, new shoulder created
farther along the blade from the original, lower orig shld stop ground off.
I hope I can get these pics to load.
Thanks for any help.
Tom