![]() | Keys, Locks or Safes. ![]() Industrial Archaeology of Locks |
History of Locks Museum | Researching locks from antiquity to the recent past. | Maintaining a reference collection & archive. |
| |
If you already subscribe its on its way If not order yours here ![]() The History of Locks Journal Updated Subject Index covering topics from v3:1 with each new issue - builds into an encyclopedic reference. |
Of the three codes I could read in marker: R3157 not found GN7211 cuts 1144 on Ilco 1004M DSD 47 GN7599 cuts 6544 on Ilco 1004M DSD 47 Per Blackhawk Codes on Line. Pete Schifferli
You were correct, it was a rivet. Now drilled out, hinge tapped & oversized screw made. Just got to get safe body upstairs now. Hopefully 2 people can carry it.
Gary, as usual you are correct on the 4 wheels. the reason i said 3 was because i have the 3 numbers for the combo. However i just checked and when i dial the first number, wheels one and two move at...
I was hoping someone could identify this Chubb combo lock for me. It is a 3 wheel combo. I am looking for a change key and hope to find a couple of new dials as well. Any help is always appreciated....
Thanks for the information, I ll try that tomorrow. I can make a larger screw on my lathe & tap the hinge with a larger thread afterwards.
Most unusual. Looks like it's a rivet in the middle. If so you could either drill it right through or just cut away the countersink on the outside and punch it in with the screws firmly in place to...
thank you,Sir appreciate the info When i have went to blawkhawk in the past it referred me to lockcodes.com is this the same ? it also gave me blackhawk7. thank you Pete i will try the blackhawk...
small pin tumbler push key padlocks