Welcome to our world of Locks and Locksmiths (click logo or scroll down to view all):-
 www.Antique-Locks.com 
  
HoL
   COLTi
Or are you looking for modern, or recent past,
Keys, Locks or Safes.
keys, locks & safes
Industrial Archaeology of Locks HoL Museum
COLTi
  
Please support our forum sponsors where you can.
Researching locks from antiquity to the recent past.Maintaining a reference collection & archive.Today's scene and cutting edge developments.
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2012
    Location
    Victoria B.C.
    Posts
    31
    Country: Canada

    Default VW stick shift lock 1954 cabriolet

    Hi all,
    Just wondering if anyone has experience fitting keys
    to the lock at the base of the gear change lever on a
    1954 Volkswagon Cabriolet? A porche blank fits in.
    Ilco #DM4 and cut a bit shorter. The customer removed it
    from the car and brought it to our shop.
    It has 4 rounded pin tumblers in a push lock type brass cyld.
    After some attempts I can't seem to pick it.
    It doesn't leave good marks for impressioning.
    Does anyone know which way it turns?
    A shim from the front won't go in.

    I'll include a pic later.

    thanks for any help.

    Tom

  2. #2
    Join Date
    Jan 2013
    Posts
    393
    Country: United States

    Default VW stick shift lock 1954 cabriolet

    Not sure but maybe have to push the cylinder in to pick the lock. Yes would like to see picture....Timothy....

  3. #3
    Join Date
    Nov 2012
    Location
    Victoria B.C.
    Posts
    31
    Country: Canada

    Default

    here's some pics of it stripped down without the
    shifter lever.

    I think it should turn ccw but not sure.
    still haven't been able to pick it.
    there is a spring inside that forces it out and
    it has a chrome cap that goes over the face to
    capture it when the key is turned.
    I think it's basically a push lock with a round shaft
    on the locking end.

    I think the operation would be:

    from unlocked-- insert key, turn key and push key & lock cyld in
    and hold in while turning the key back to insert position
    and then pull the key out with the lock cyld remaining recessed the
    distance you pushed it in. The key will need to have a long enough neck.

    from locked: insert key and turn it. lock cyld & key will
    pop out under spring pressure. turn key to removal position.

    Thanks for any help.
    Tom
    Attached Thumbnails Attached Thumbnails IMG_20170308_165517.jpg   IMG_20170308_165534.jpg   IMG_20170308_165556.jpg  

  4. #4
    Join Date
    Jan 2013
    Posts
    393
    Country: United States

    Default VW stick shift lock 1954 cabriolet

    It there anyway to get the cylinder out..??.. It may help of what you looking at.....Timothy......

  5. #5
    Join Date
    Sep 2004
    Location
    Devon UK
    Posts
    2,867
    Country: UK

    Default

    Try steve@steveslockshop.com
    He does a lot of old VW's
    Cheers
    Tom

  6. #6
    Join Date
    Nov 2012
    Location
    Victoria B.C.
    Posts
    31
    Country: Canada

    Default

    Thanks very much for that lead Tom.
    I sent him an email with pic.
    Hopefully he can tell me which way it turns.

    Tom

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •