-
15-06-10 03:27 AM #31
Member
- Join Date
- Jun 2010
- Posts
- 5
Miller lock co. Phila usa: Standard time g 30
Hey I have a lock that I just won on ebay but I don't know the code :( I really need help on cracking this code. The lock says its a "MILLER LOCK CO. PHILA USA" "STANDARD TIME" with "G 30" stamped on the back of the shackle. Patents "Aug 25, 1908, Nov 6, 1908, Nov 29, 1910. I have no idea what the code is or how to open this. Somebody please help me. I took a picture of me holding it for a better reference....A4
-
16-06-10 03:30 AM #32
Member
- Join Date
- Dec 2009
- Posts
- 204
The Miller company of Philadelphia is of no relation to the Miller/Gougler/Miller companies in this thread, but hopefully that won't prevent somebody from helping.
-
28-06-10 06:10 PM #33
Member
- Join Date
- Jun 2010
- Posts
- 4
Seeking Combination
Gougler Keyless lock with Code 5 221.
Thank you,
Steve Tepper
-
28-06-10 07:01 PM #34
Does the lock have a positive stop when you turn the dial? Also is the number 5 221 or 5221 or is it S221. Mark
-
28-06-10 07:15 PM #35
Member
- Join Date
- Jun 2010
- Posts
- 4
-
28-06-10 07:51 PM #36
Member
- Join Date
- Jun 2010
- Location
- Erin, TN
- Posts
- 5
Gougler Red Dot Padlock
I just received this padlock from my mother. I beleive she received it from my Uncle who had passed away. No combination.
Would anyone have the combo?
Shackle Number is 19
Lock Body Number is 166
Thanks,
Jay D Reedy
-
28-06-10 11:40 PM #37
Southgate, I'm not real sure if the space between the 5 and the 2 makes it a 3 digit or a 4 digit code so I looked up both. First try the 4 digit, start by going left to 0 then R1-L2-R5. If that dosn't work start by going left to 0 then R6-L2-R7. If it still dosn't work,start at 0 then go L10-R6-L2-R7. Hopefully one of these combinations will work.please let us know which one works if any.Mark
-
29-06-10 12:24 AM #38
Member
- Join Date
- Jun 2010
- Posts
- 4
-
29-06-10 03:49 AM #39
Southgate, Did you try pulling up on the bail when you reached the last number? There is no spring that pops the bail open on these locks. If you did and none of the combos worked,try L0-R11-L2-R5. I'm sorry if I'm not being any help,but the Reed code book that I'm getting the codes from isn't always accurate.Usually the last 2 digits in the combo are right but the first right from left zero is off.If all else fails try going through the sequence changing the first R by 1 digit every time leaving the last 2 digits the same.Hope you can get it, Mark

---------- Post added at 03:40 AM ---------- Previous post was at 02:47 AM ----------
JDREEDY, here I go again. Try from zero go,L5-R6-L5-R4. Pull the bail up when you get the last number dialed in. Be very diligent when dialing the combo in. If you go past a number (click) by even a little bit ,it will throw it off and you'll have to start over from the begining. Good luck and be sure to let us know how it worked. Mark
---------- Post added at 03:49 AM ---------- Previous post was at 03:40 AM ----------
Southgate, Looking at you pics, I'm wondering if the 1 could posibly be a missstamped 7. You might also try from Zero R8-L9-R5 just in case.If none of these combos work,I don't know what else to tell you. Mark
-
29-06-10 12:01 PM #40
Member
- Join Date
- Jun 2010
- Posts
- 4
LinkBacks (?)
-
21-11-10, 11:24 PM
-
12-08-10, 01:38 AM
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)


LinkBack URL
About LinkBacks
Reply With Quote

