Thread: Chubb key deposit box.
-
13-08-06 09:45 AM #1
Chubb key deposit box.
This type of box were supplied to banks where chubbs supplied & installed vaults etc, they are usually smaller & simpler than this example and were intended to hold the spare keys which could then be placed for safe keeping with another bank.
I have never seen the style of escutcheon elsewhere.
I doubt the box was ever used as the whole thing is in very good condition with all original keys / tags.
I have no history on the piece, but do hope to gain such information in the future from the serial numbers.----
Oldlock.
-
15-08-06 07:46 PM #2
That is nice!
I like the subtle warding on the keys, to prevent the wrong key being turned. Touches like that are a sure sign of quality, even beyond the silver escutcheons!
-
13-11-06 05:53 PM #3
The escutcheons (well the one that I have) is brass and smaller but heavier than might be expected by just looking. Given the application, I am not suprised that it just sat there untouched and so remains in very good condition with the tags intact even if it was in full use
Cheers
Tom
-
13-11-06 09:34 PM #4
This one is made of 1/4 " steel plate, any chance of pictures etc of yours ??
----
Oldlock.
-
13-11-06 09:41 PM #5
It is identical but brass
Cheers
Tom
-
14-11-06 11:55 AM #6
Could you post the serial numbers ? Both the box and locks, for comparision to my example.
----
Oldlock.
-
14-11-06 10:38 PM #7
Aha I see why where we got our wires crossed -I only have the escutcheon - a brass box would have been fabulous!
Cheers
Tom
-
08-06-07 11:57 PM #8
Member
- Join Date
- Oct 2006
- Location
- Devon UK
- Posts
- 18
Re:
Originally Posted by NKT
True but you can still turn the wrong key in one of the locks (the key with the sideward will turn in the lock without the sideward)
Ian
-
09-06-07 12:06 AM #9
Re: Re:
No it will not, as the bit is slightly wider.
Originally Posted by Ian D. Lewis
----
Oldlock.
-
13-05-08 01:38 AM #10
Site Supporter.
- Join Date
- May 2008
- Posts
- 120
Re: Chubb key deposit box.
Not to mention that the combinations of the two keys are different as well.
I found that item interesting because we never encounter that kind of thing in the US. As interesting to me was the discussion that followed because it raises a question in my mind. All mentioned the side ward and I certainly see the ward cut on the far end of the bit. The question I have is, could that not also have been a cut for an end ward? Or, are end wards only used in door locks and not cabinet locks? Or, does the post have to be flush with the end of the bit or shorter than the bit to indicate an end ward? Or, are end wards only used with drilled or pipe keys? Thanks in advance.
BBE.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)


LinkBack URL
About LinkBacks
Reply With Quote

